24VDC 10M Accent Series Dotless Strip Lights – 24V COB LED Strip 32ft, 528 LEDs/m, Dimmable, Dot-Free Indoor Tape for Cabinets, Shelves, Rooms & Accent Lighting – ETL, IP20

The SwitchToLED 24VDC Accent Series Dotless COB LED Strip Light delivers flawless, continuous illumination with advanced Chip-on-Board (COB) technology, featuring 528 LEDs per meter and a high CRI >90 for up to 1400 lumens per meter of bright, true-to-life lighting without visible dots. Selectable in 3000K Warm White, 4000K Neutral White, or 6000K Cool White, this 24V flexible strip is designed for professional installations and longer runs, making it perfect for kitchens, workspaces, retail shelves, and accent lighting. Built with industrial-grade 3M adhesive and cuttable every 2.46 inches, it allows precise customization with no wasted length, while the 24V design minimizes voltage drop for longer continuous runs compared to 12V strips. Each 10M (32.8ft) reel is ETL Listed for safety and can be extended end-to-end or routed around corners using wire or solderless connectors. Operating on 24V DC constant voltage at 14W per meter (~140W per reel), the strip is highly efficient and should be paired with a properly sized power supply (10–20% overhead recommended). Fully dimmable, it works seamlessly with 24V PWM dimmers or dimmable power supplies compatible with standard wall dimmers such as Lutron and Leviton, making it a reliable choice for both residential and commercial projects.

Technical Specifications

Detailed Wattage Table for 24V Spotless COB LED Strips

Frequently Asked Questions (FAQs)

Q1: Do I need aluminum channels for installation?
Not required, but recommended. Channels improve heat dissipation and give a clean, finished look.

Q2: Can I cut this strip like the 12V version?
Yes, it can be cut every 2.46 inches at the solder pads.

Q3: How long can I run this without voltage drop?
Up to 32.8ft (10M) per reel. For longer runs, use parallel wiring or multiple power supplies.

Q4: How much power does it consume?
14W per meter (~140W per reel). Choose a power supply with 10–20% overhead.

Q5: Is it waterproof?
No. It is IP20 indoor-rated. For outdoor use, place it in a waterproof housing.

Q6: Can it bend around corners?
Not directly. Use strip-to-wire connectors for 90° turns.

Q7: Will it work with a 12V setup?
No. This strip requires 24V DC.

Q8: What’s the amperage requirement?
~0.58A per meter. A full 10M reel requires ~5.8A at 24V.

Q9: Is RGB available?
No, this model is white only (3000K/4000K/6000K). RGB COB versions are in development.

Q10: What are the dimensions?
Width: 10mm, Thickness: ~2.5mm.